Modern Construction Materials of Espandar Brand

Espandar brand powder tile and ceramic adhesives is a type of mortar with a modern formulation, which is made on the basis of cement and polymer additives. The high strength and adhesion power makes Espandar tile adhesive the best alternative to traditional cement-sand mortar for tiling.

In the past, paste adhesives or cement mortar were mostly used for tile and ceramic work, but with the advent of powder tile adhesives, the use of old mortars has become completely obsolete in European countries. Because these adhesives can be used quickly by adding a small amount of water.

Due to the presence of polymer materials, ceramic glue and Espandar powder tiles become an insulating and impermeable material against moisture after mixing with water, which prevents cracking. The high resistance of this type of adhesive against heat, cold and other environmental factors is another unique feature of powder adhesives.

The most important properties of ceramic and tile adhesives:

  • High adhesive strength
  • Unique Formulation
  • Eco-friendly
  • Moisture resistant
  • Uses of tile and ceramic powder spanner adhesive

Installing all kinds of ceramic tiles in different sizes:

  • Installing ceramics and flooring for dry and wet spaces inside and outside buildings
  • All kinds of walls made with different cement, brick and concrete materials
  • Ceramic tiles and porcelain products (using Espandar porcelain glue)
  • Slabs, granite and antique stones (using spandar slab glue)

Espandar waterproofing mortar has localized Swiss waterproofing. We remove bituminous and isogum pollution and guarantee the sealing and insulation of components.

Espandar waterproofing consists of two components: polymer and cement. The rubber-like polymer acts as a seal and the cement protects the polymer and adheres to the surface. The surface made of spandex waterproofing has the ability to cover subsequent layers (spandex plaster, tiles, slabs, plaster, etc.).

Insulation of building facades, swimming pools, channels and manholes, tunnels and basement walls, etc. is one of the most important applications of spandar waterproofing.

Espandar waterproofing is the best option for sealing the facade of the building in the northern provinces of the country.

Espandar plasters are cement-based plasters that have improved their adhesive properties and efficiency by adding polymer materials. This coating is used in the form of one or several thin layers to cover the facade of the building, wall and roof.

Espandar plasters can be applied manually or using a plaster pump on the surface. Espandar plasters are used on all concrete surfaces, cement and clay blocks, autoclaved aerated concrete blocks (AAC) and traditional cement plasters.

Espandar masonry mortar is the best alternative to traditional mortars for general purposes such as wall cladding, flooring, etc. Espandar masonry mortar with the experience of Swiss building materials, while speeding up the construction process and reducing the man-hours used, guarantees the durability and adhesion of the walls and minimizes the human casualties caused by a possible earthquake.

The grading of sands in the sand mortar and appropriate polymer additives make the ready-to-use spandex mortar have uniformity of quality and the highest adhesion.

The most important advantages of using Espandar masonry mortar compared to traditional cement sand mortar

  • Removing the process of transporting sand and cement to the floors of the building
  • Eliminate the manual mixing process
  • Removal of the process of sanding bricks
  • Mortar quality uniformity
  • Increasing compressive strength and tensile adhesion strength
  • Reduction of working hours